humerus neck locking compression plate

Zimmer® Periarticular Proximal Humeral Locking Plate humerus neck locking compression plate

The locking plate design does not require compression between the plate and bone to accommodate loading. Therefore, purchase of the screws in the bone can be achieved with a thread profile that is shallower than that of traditional screws.Zimmer® Periarticular Proximal Humeral Locking Plate humerus neck locking compression plateLocking Plate Technology By using locking screws in a bone plate, a fixed-angle construct is created. In osteopenic bone or fractures with multiple fragments, secure bone purchase with conventional screws may be compromised. The locking screws do not rely on bone/plate compression to resist patient load, but function similarlyVariAx 2 Compression | StrykerSOMA designed broad and narrow plates provide flexibility to choose option based on patient anatomy. Anatomic plate designed to match the curve of the radial bow. Flexibility to use both 2.7mm or 3.5mm locking/non-locking screws. Common T10 screw interface allows for one screwdriver regardless of locking or non-locking screws for ease of use

Unusual radial nerve injury by a locking compression plate humerus neck locking compression plate

At surgery, the fracture showed only minimal callus formation and no signs of infection. The humerus was reduced and stabilised with a 3.5 mm titanium pelvic reconstruction plate combined with 3.5 mm locking compression plate extra-articular distal humerus plate (both Synthes BV, Zeist, the Netherlands). There were no postoperative complications.The use of locking plates in proximal humeral fractures humerus neck locking compression plateThey are site-specific, low-profile plates. The plate is precontoured for the proximal humerus, and the insertion of locking screws obviates the need for a plate-to-bone compression, preserving the blood supply to the bones.The clinical benefit of medial support screws in locking humerus neck locking compression plateThe purpose of this study was to evaluate the clinical benefit of medial support screws for locking plating of proximal humerus fractures. Seventy-two consecutive patients underwent prospective treatment for proximal humerus fractures with locking plates between October 2007 and September 2008. Sixty-eight patients accomplished a mean 30.8-month follow-up and were randomized into two groups humerus neck locking compression plate

The clinical benefit of medial support screws in locking humerus neck locking compression plate

The purpose of this study was to evaluate the clinical benefit of medial support screws for locking plating of proximal humerus fractures. Seventy-two consecutive patients underwent prospective treatment for proximal humerus fractures with locking plates between October 2007 and September 2008. Sixty-eight patients accomplished a mean 30.8-month follow-up and were randomized into two groups humerus neck locking compression plateSingle locking compression plate xation of extra humerus neck locking compression platehumerus fractures with preoperative radial nerve palsy [6]. They used a dynamic compression plate for xation (with two screws on either side of the fracture). The purpose of our study was to assess the effectiveness of a contoured standard 4.5-mm locking compression plate (LCP), with the use of only two screws in the distal fragment, in theRESEARCH ARTICLE Open Access Does medial support who were treated with an anatomic proximal humeral locking plate and suture augmentation were included in this study. The implants used in this series included 40 proximal humerus locking compression plates (PH-LCP, Synthes, Switzerland) and 23 PHILOS plates (Synthes, Switerland). Exclusion criteria

Plating of humeral shaft fractures: Comparison of standard humerus neck locking compression plate

Feb 01, 2012 · Methods. Minimally invasive plate osteosynthesis (MIPO, n = 29) was prospectively performed from around the middle of the study period, while open reduction and plate osteosynthesis (ORPO, n = 30) had been the original standard method.Locking compression plate was used in these two groups. Major characteristics of the two groups were similar in terms of fracture type, fracture Pitfalls and complications with locking plate for proximal humerus neck locking compression plateJun 01, 2010 · Specific complications, such as pseudarthrosis or plate fracture, are mostly related to the fact that the construct is extremely rigid. 20 That is why locking plates failed by a mono-block pull-out of the humeral head or out of the humeral shaft. That is also why breakage of the plate is observed when a screw does not fill all the humerus neck locking compression platePitfalls and complications with locking plate for proximal humerus neck locking compression plateJun 01, 2010 · Specific complications, such as pseudarthrosis or plate fracture, are mostly related to the fact that the construct is extremely rigid. 20 That is why locking plates failed by a mono-block pull-out of the humeral head or out of the humeral shaft. That is also why breakage of the plate is observed when a screw does not fill all the humerus neck locking compression plate

PRODUCT INFORMATION - Medartis

Fracture patterns in the radial head and neck are often very complex. A plate with diverse locking options and multidirectional stability can facilitate fixation. Even multi-fragment fractures can be treated with the plate and prevent radial head resection.PERI-LOC Periarticular Locked Plating System for Upper and humerus neck locking compression plate4.5mm Proximal Humerus Locking Plate 4.5mm Lateral Distal Femur Locking Plate 4.5mm Lateral Proximal Tibia Locking Plate 4.5mm Locking Compression Plate 4.5mm Broad Compression Plate, Non-locking 4.5mm Narrow Compression Plate, Non-locking Small Fragment Plate Options. Clavicle Locking Plate 3.5mm Proximal Humerus Locking PlatePERI-LOC Periarticular Locked Plating System for Upper and humerus neck locking compression plate4.5mm Proximal Humerus Locking Plate 4.5mm Lateral Distal Femur Locking Plate 4.5mm Lateral Proximal Tibia Locking Plate 4.5mm Locking Compression Plate 4.5mm Broad Compression Plate, Non-locking 4.5mm Narrow Compression Plate, Non-locking Small Fragment Plate Options. Clavicle Locking Plate 3.5mm Proximal Humerus Locking Plate

Narrow locking compression plate vs long philos plate for humerus neck locking compression plate

Aug 17, 2019 · Background. Our hypothesis was that minimally invasive plate osteosynthesis (MIPO) using long philos plate (LPP) would show better clinical and radiological outcomes and less complications than narrow locking compression plate (NLCP) for spiral humerus shaft fractures with or without metaphyseal fracture extension.Lateral Subcutaneous Locking Compression Plate and Small humerus neck locking compression plateThe abridged general view of the distalthird diaphyseal humerus fracture fixed with lateral subcutaneous locking compression plate (LCP). (A) The anteroposterior view shows the relationship between the plate, the fracture line, and the radial nerve; the LCP is located subcutaneously and LCP Extra-articular Distal Humerus Plate. The LCP Extra-articular Distal Humerus Plate Surgical Technique DePuy Synthes13 Select a locking screw with the appropriate length. Insert the locking screw with the appropriate screwdriver shaft (hexagonal or Stardrive recess) mounted on the 1.5 Nm torque limiter (4). Insert the screw manually or

Difficulties encountered removing locked plates | The humerus neck locking compression plate

Additions have included the locking compression plate (LCP), the less invasive stabilisation system (LISS) and the Proximal Humeral Interlocking System (PHILOS; Synthes, Welwyn Garden City, UK). Advantages of these locked internal fixators have been seen for periarticular and comminuted fractures as well as fixation in osteoporotic bone. 5Difficulties encountered removing locked plates | The humerus neck locking compression plateAdditions have included the locking compression plate (LCP), the less invasive stabilisation system (LISS) and the Proximal Humeral Interlocking System (PHILOS; Synthes, Welwyn Garden City, UK). Advantages of these locked internal fixators have been seen for periarticular and comminuted fractures as well as fixation in osteoporotic bone. 5Difficulties encountered removing locked plates | The humerus neck locking compression plateAdditions have included the locking compression plate (LCP), the less invasive stabilisation system (LISS) and the Proximal Humeral Interlocking System (PHILOS; Synthes, Welwyn Garden City, UK). Advantages of these locked internal fixators have been seen for periarticular and comminuted fractures as well as fixation in osteoporotic bone. 5

DePuy Synthes Proximal Humerus Locking Compression

DePuy Synthes Proximal Humerus Locking Compression Plate (LCP®) System is an anatomically shaped bilaterally fitting locking plate. It includes 10 suture holes around the perimeter of the proximal end. The shaft portion of the plate has oblong holes to aid in position. The undersurface of the plate contains limited-contact undercuts for periosteum protection consideration.Current concepts in locking plate fixation of proximal humerus neck locking compression plateSep 25, 2017 · Standardized proximal humerus fractures were created in a synthetic osteoporotic bone. In one group, osteosynthesis was performed with a lateral locking plate combined with calcar screws. In the second group, an intramedullary fibular graft of 6-cm length supplemented the lateral locking plate.Current concepts in locking plate fixation of proximal humerus neck locking compression plateSep 25, 2017 · Micic ID, Kim K-C, Shin D-J, Shin S-J, Kim P-T, Park I-H, Jeon I-H. Analysis of early failure of the locking compression plate in osteoporotic proximal humerus fractures. J Orthop Sci. 2009;14:596601. Article PubMed Google Scholar

Complications Associated with Locking Plate of Proximal humerus neck locking compression plate

Locking plate represents a relatively new technology that theoretically supports fixation in the setting of osteoporotic bone.6Its biomechanical properties made it promising in the setting of proximal humerus fractures, where purchase in the humeral head is difficult to obtain, due to large variations in bone density and strength.7Understandably, complications were highly variable as locking plates first began to be used in the proximal humerus fractures.Comparison study of the clinical effect and biomechanics humerus neck locking compression plateKeywords: Humerus shaft fracture, Locking compression plate, Interlocking intramedullary nail, Biological osteosynthesis principle, Clinical effect. Accepted on June 12, 2017 Introduction Humerus shaft fracture refers to that located between 2 cm to humerus surgical neck and 2 cm to humerus China Humerus Neck Locking Compression Plate - China humerus neck locking compression plateChina Humerus Neck Locking Compression Plate, Find details about China Locking Plate, Titanium Locking Plate from Humerus Neck Locking Compression Plate - Suzhou Gemmed Medical Instrument Co., Ltd.

Bilateral locking compression plate and transcondylar humerus neck locking compression plate

Bilateral locking compression plate and transcondylar screw fixation for stabilization of canine bicondylar humeral fractures. Javier García Ldo Med Vet. Corresponding Author. E-mail address: humerus neck locking compression plateBilateral locking compression plate and transcondylar humerus neck locking compression plateBilateral locking compression plate and transcondylar screw fixation for stabilization of canine bicondylar humeral fractures. Javier García Ldo Med Vet. Corresponding Author. E-mail address: humerus neck locking compression plateBilateral locking compression plate and transcondylar humerus neck locking compression plateBilateral locking compression plate and transcondylar screw fixation for stabilization of canine bicondylar humeral fractures. Javier García Ldo Med Vet. Corresponding Author. E-mail address: humerus neck locking compression plate

AxSOS 3 Ti Proximal Humerus | Stryker

Monoaxial locking plate system for treating proximal humerus fractures. Monoaxial locking plate system for treating proximal humerus fractures. We use cookies to customize content for your viewing and for analytics. If you continue to browse this website, we will assume that you are happy to locking compression plate Internal xation of proximal humerus neck locking compression platenew locking compression plate method. Patients and methods 72 patients (44 women) with an acute fracture of the proximal humerus were treated with the lock-ing compression plate (Philos) at our department between February 2002 and January 2003. The mean age of Neck Of Humerus Titanium Orthopedic Implant - Buy Neck Of Humerus Titanium Orthopedic Implant , Find Complete Details about Neck Of Humerus Titanium Orthopedic Implant,Implant,Orthopedic,Orthopedic Implant from Tracheal Cannula Supplier or Manufacturer-Jiangsu Shuangyang Medical Instrument Co., Ltd. humerus neck locking compression plate Locking and Compression plate. Material: Pure titanium. Material grade: Grade 3. Surface humerus neck locking compression plate

Humerus Fracture: Types, Causes, Treatment, and Healing

May 24, 2018 · A humerus fracture is a break in the large bone of your upper arm. There are several types of humerus fractures, depending on the location of DePuy Synthes Proximal Humerus Locking Compression Plate humerus neck locking compression plateDePuy Synthes Proximal Humerus Locking Compression Plate (LCP®) System is an anatomically shaped bilaterally fitting locking plate. It includes 10 suture holes around the perimeter of the proximal end. The shaft portion of the plate has oblong holes to aid in position. The undersurface of the plate contains limited-contact undercuts for periosteum protection consideration.DePuy Synthes Proximal Humerus Locking Compression Plate humerus neck locking compression plateDePuy Synthes Proximal Humerus Locking Compression Plate (LCP®) System is an anatomically shaped bilaterally fitting locking plate. It includes 10 suture holes around the perimeter of the proximal end. The shaft portion of the plate has oblong holes to aid in position. The undersurface of the plate contains limited-contact undercuts for periosteum protection consideration.

3.5/4.5 mm Synthes Plate | Curved LCP® | J&J Medical Devices

The DePuy Synthes Trauma Locking Compression Plate humerus neck locking compression plate The DePuy Synthes 4.5 mm Curved LCP Plates are intended for fixation of various long bones, such as the humerus, femur, and tibia. They are also for use in fixation of periprosthetic fractures, osteopenic bone, and nonunions or 3.5 mm LCP Periarticular Proximal Humerus Plate. Part of humerus neck locking compression plateThe 3.5 mm LCP Periarticular Proximal humerus plates fea- ture locking screw technology combined with conventional plating techniques. The plates feature combi holes that allow fixation with either locking screws in the threaded section for angular stability or cortex screws in the dynamic compression unit (DCU) section for compression.

Have a question or need a custom quote?

Please contact us leebbnsteel@outlook.com